|
Norstar system peripherals and
accessories
You can add peripherals and
accessories to your Norstar system to customize
the equipment to suit your individual needs. The
following components can be purchased separately
or included with a complete system.
The
M0x16 station module allows the addition of up to
sixteen Norstar phones on a Modular system. There
are two types of M0x16 modules: copper and fiber.
Copper M0x16 modules connect to the M8x24 KSU,
while Fiber M0x16 modules connect to the MICS 0x32
KSU. An expansion card in the KSU is required to
connect the modules to the KSU. All modules come
complete with a DS-30 connection cable and
wall-mount brackets.
The
M12x0 trunk module allows the addition of up to
twelve incoming lines on a Modular system. Each
modules hold up to three trunk cards, which
support up to four lines each. There are two types
of M12x0 modules: copper and fiber. Copper M12x0
modules connect to the M8x24 KSU, while Fiber
M12x0 modules connect to the MICS 0x32 KSU. An
expansion card in the KSU is required to connect
the modules to the KSU. All modules come complete
with a DS-30 connection cable and wall-mount
brackets.
The
4x0-CLID trunk card supports up to four incoming
lines with Caller ID. This card is compatible with
the CICS 8x16, the M8x24 (with trunk module), and
the MICS 0x32 KSU.
The
4x0-DS trunk card supports up to four incoming
lines. This card is compatible with the CICS 8x16,
the M8x24 (with trunk module), and the MICS 0x32
KSU.
Each
T-1 Digital Line trunk card supports one T-1 line
or PRI line coming into the MICS 0x32 KSU. A
services card or a 6-port fiber combo card is also
required for the T-1 card to work properly. There
are software requirements to support PRI lines.
Please contact us
for more information.
|